Welcome to the Honest Water Co family
Your new system is running. A few things will look or behave differently over the first several weeks. Everything below is normal.
We provided one bag of salt with your installation. Add two more bags soon, then keep the brine tank between half and two-thirds full from there on. Topping it off on that schedule is the only routine upkeep the softener needs.
Salt mixed with water becomes a brine solution, and that solution is what makes the softening process work. Seeing water in the brine tank alongside the salt is expected.
The water level will sit higher or lower depending on which part of the cycle the system is in, and the water may look brown. Both are normal.
The valve displays gallons remaining and gpm. Gallons remaining counts down to the next regeneration. The gpm reading shows how many gallons per minute are flowing right now, so when no water is running in the home it will read 0.0.
The tankless reverse osmosis takes a few seconds to send water to the faucet. There is no reservoir of water waiting in a tank, so the motor has to engage first and push water up. That pause is normal.
If your reverse osmosis has an alkaline filter, the water may look cloudy. That comes from the filter activating minerals. Bubbly water is oxygen. Both settle after the water runs for a moment.
If the reverse osmosis goes an extended period without use, you may see this happen again.
An alkaline filter adds minerals back into the water, so a reverse osmosis system paired with one will show a higher TDS number. That is the filter doing its job, not a problem with the system.
You do not need to track this yourself. We will reach out when it is almost time for your reverse osmosis filters to be replaced and schedule the visit with you.