

Well water treatment in two stages. Air-injection oxidation breaks iron and sulfur out of solution so a catalytic carbon and Katalox Light bed can filter them, then a CG10 resin tank softens what is left. No chemicals to buy or handle.
| Application | Well water |
| Configuration | Dual tank, air-injection oxidation |
| Tank 1 (D×H) | 10" × 60" |
| Tank 1 media | Catalytic carbon + Katalox Light, 1 cu ft |
| Tank 2 (D×H) | 10" × 60" |
| Tank 2 media | CG10 resin, 48,000 grain, 1.5 cu ft |
| Brine tank | 15"L × 17"W × 36"H |
| Salt storage | 150 lbs |
| Targets | Iron, sulfur, hardness |
| Operating pressure | 30 – 125 PSI |
| Water temperature | 40° – 110°F (4° – 43°C) |
| Electrical | 110V — both valves |
| Salt per regeneration | 9 lbs |
| Water per regeneration | 45 – 60 gallons |
| Oxidation | Air injection, drawn and vented each cycle — no chemical feed |
| Regeneration | Demand-initiated metering on both tanks |
| Control valve | Ceramic disc ProValve — 72-hour memory backup, 1"–1.25" bypass |
| Iron / sulfur media | Katalox Light with catalytic coconut-shell carbon |
| Softening resin | ResinTech CG10 strong-acid cation, 10% crosslinked — WQA Gold Seal |
| Mineral tanks | Fiberglass pressure tanks — lifetime warranty |
| Assembly | Fort Worth, Texas |
| Certifications | NSF/ANSI 44, NSF/ANSI 61 |
| Valve warranty | 5 years on the control valves; lifetime on the ceramic discs |
| Installation | Professional installation included — Honest Water Co of El Paso |
Component brands and certifications are those of their respective manufacturers. Do not use on water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.