

The first line of defense. A 20" × 4.5" 5-micron cartridge catches sand, rust, dirt, and grit before they reach the main system, protecting the media bed and extending its life while holding water pressure.
| Type | Pre-system sediment filter, complete build |
| Cartridge dimensions | 20" × 4.5" |
| Micron rating | 5 micron |
| Flow rate | 5 GPM |
| Filter life | 10,000 gallons |
| Initial pressure drop | 1 PSI |
| Includes | Housing, mounting bracket, cartridge |
| Position | Ahead of the main system |
| Operating pressure | 30 – 125 PSI |
| Water temperature | 40° – 110°F (4° – 43°C) |
| Electrical | None required |
| Cartridge change | Roughly every 10,000 gallons or when pressure drops |
| Change time | A few minutes with the supplied housing wrench |
| Standard on | Well water installations |
| Housing | Quick-change filter housing with pressure-relief button |
| Bracket | Wall mounting bracket included |
| Cartridge | 5-micron pleated sediment cartridge |
| Assembly | Fort Worth, Texas |
| Installation | Professional installation included — Honest Water Co of El Paso |
Component brands and certifications are those of their respective manufacturers. Do not use on water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.