

The City Water Mixed Bed system combines high-capacity CG10 softening resin and coconut shell carbon in a single tank — cutting hardness, chlorine taste and odor, and sediment from municipal water. Softer skin and hair, spot-free glassware, and far less scale on fixtures and appliances.
| Application | City / municipal water |
| Configuration | Single tank, mixed bed (resin + carbon + polishing gravel base) |
| Valve | AWW ProValve — ceramic disc design |
| Valve flow rate | 25.5 GPM |
| Grain capacity | 36,000 grain |
| Resin type | CG10 Resin |
| Resin volume | 1.125 cu ft |
| Carbon type | Granular activated coconut shell carbon |
| Salt used per regeneration | 9 lbs per regeneration |
| Water used per regeneration | 45–60 gallons per regeneration |
| Salt storage capacity | 150 lbs |
| Brine tank dimensions | 15″L × 17″W × 36″H |
| Media tank size (D×H) | 10″ × 60″ |
| Electrical requirements | 110 volts |
| Shipping weight | 95 lbs |
| With Extra Large upgrade — Grain capacity | 48,000 grain |
| With Extra Large upgrade — Resin volume | 1.5 cu ft |
| With Extra Large upgrade — Media tank size | 12″ × 58″ |
| Targets | Hardness, chlorine, taste & odor, sediment |
Not intended for treating water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.